Whirlpool washing machine error codes and alerts

Whirlpool washing machine error codes and alerts

Whirlpool washing machines may display numeric codes and usage alerts. This index distinguishes front-load and HE top-load models from the product ranges documented in North America.

Front door, top lid and dispensing

In Whirlpool’s North American support information, F5 E2 refers to the front-door lock, while LdL and LdU describe lid-related situations on HE top-loaders. LOC or LC refers to the control lock: it does not mean that a lock is jammed.

The messages dET and F8 E2 affect the dispenser, but require different checks: recognising a cartridge is not the same as checking for residue in the system.

Choose what to check based on the point in the cycle

  • If filling takes too long, see F8 E1, LF and Lo FL and check which water inlets your model requires.
  • If water remains in the washer, distinguish F9 E1 from drn based on the type of load.
  • If rinses take longer because of excess suds, Sud or Sd points to the detergent and the amount used.
  • An unevenly distributed load corresponds to Ofb; an excessive load, to OL.

Messages that may accompany normal operation

The official front-load table includes Int during cycle interruptions and rL/F34 when it detects clothes in the cleaning programme. In the latter case, remove the clothes before maintenance. On compatible top-loaders, PF indicates a power interruption. The steps for continuing depend on the control panel.

Keep the complete model number, code and load type handy before choosing a procedure. These correspondences are not a guide to every European Whirlpool model or to every appliance with the same logo.

Frequently Asked Questions

Where can I find the complete model number of my Whirlpool washing machine?

Check the appliance’s identification plate and your purchase documentation. Its location varies by design; look for the model and serial number section in the manual, and do not remove panels to find it.

Does the same code mean the same thing on all Whirlpool washing machines?

No. Whirlpool uses different platforms. This index is based on North American support information for front-load and HE top-load models; a model from another market needs its own manual.

How can I tell a normal alert from a fault?

Read the complete message: LOC/LC indicates that the controls are locked, while F5 E2 relates to the front-door lock. It also matters whether the appliance is following an expected routine or repeatedly interrupting the wash.

Does clearing the code confirm that the problem is resolved?

No. A reset may remove the display without fixing a water restriction, an improperly closed door or a leak. Check the result of the permitted corrective action, and do not repeat cycles if there are signs of risk.

What information should I give the service technician?

Provide the model and serial numbers, the complete message, load type, cycle stage, and whether water or clothes are trapped in the washer. Mention any recent changes to the installation, detergent or load, and the checks you performed.

A simple external adjustment may resolve an operating condition. If the same alert returns with the correct installation and load, keep a record and contact support.