
AEG warnings are grouped by water inlet, drainage, door locking, protection, heating and power supply. Identify the PNC to apply the table to your platform.
Displayed code or sequence of flashes
In AEG European support ranges, E10/E11/C1 may be accompanied by one beep or flash; E20/E21/C2, by two; E40/E41, by four. Count complete sequences and pauses, and check that your manual documents this interpretation. Do not treat every flashing light as a code.
The condition changes the priority
EF0/EFO and EF3 require you to distinguish between foam, laundry imbalance and a leak. If water is escaping, deal with the leak before attempting any reset. EH0/EHO relates to the power supply; E60 covers heating problems, but does not identify a specific component on its own.
E50, C9 and F9: seek assistance if they persist
The official AEG help for E50 groups these messages as a motor or motor-control fault. It suggests trying a reset and contacting a service engineer if the warning returns. Do not continue using the appliance if the fault persists, or test internal circuits to locate it.
The PNC and load type help you check the manual, filter access and controls. This documentation does not authorise you to apply the meaning of an AEG code to another brand in the same group or to assume it applies in every market.
Frequently Asked Questions
Where can I find the full model number of my AEG washing machine?
Look for the model and PNC on the rating plate, using the location shown in the manual. Copy the full reference and version, if shown; the product name does not identify every variant.
Does the same code mean the same thing on all its washing machines?
You should not assume so. The PNC distinguishes platforms and variants, and procedures may differ for front-loading, top-loading and washer-dryer models, even when they belong to the same warning-code family.
How can I tell a normal warning from a fault?
Compare the sequence with the manual and how the cycle is behaving. An active function or a pause may be normal; a persistent warning about the supply, door lock or protection needs to be checked using the relevant procedure.
Does clearing the code confirm that the problem is fixed?
No. A reset may clear the display without fixing the cause. If there is a leak or a persistent electrical fault, stop using the appliance and seek assistance.
What information should I give the service engineer?
Provide the model, PNC, full code or sequence of flashes, and load type. Mention the stage of the cycle, any water left inside or visible leak, and any recent changes to the installation or detergent dosing.
Keep a record of the full subcode; summarising all warnings as an electrical fault removes useful diagnostic information.




