EH0/EHO on AEG indicates an electrical supply issue. EH1 refers to frequency, EH2 to high voltage and EH3 to low voltage in the documented family.
Keep the subcode
The manufacturer's documentation distinguishes these alerts. The code reports a detected condition; on its own, it does not provide a measurement or confirm that the circuit board is damaged.
Check from the outside that the connection is direct and compatible with the appliance's installation. Do not use extension leads or adaptors to try to get around the error. Note whether it occurred alongside a power cut, fluctuations affecting other appliances or electrical work.
A reset under safe conditions
Support guidance allows you to disconnect the appliance and wait for 30 to 60 seconds before reconnecting it and selecting a programme, provided the socket is dry and accessible and there are no signs of damage. If there is a burning smell, a hot plug, sparks or a circuit breaker that trips, do not try this: request an electrical inspection.
If other appliances are also failing, consult an electrician; if the power supply has been checked and EH0 persists, contact the washing machine service team. Electrical connection and protective devices explains what needs to be checked in the installation. Do not open sockets or measure the appliance while it is energised.
A lamp lighting up when plugged into the same socket does not, by itself, confirm that the power supply is suitable for the washing machine.
View all articles in AEG washing machine error codes and warnings
