Installing a washing machine in a cabinet or under a worktop

The cabinet must accommodate the installation specified by the manufacturer and allow for use and maintenance. The fact that the appliance physically fits does not mean you can remove its cover, conceal connections or reduce clearances.

Confirm the type of installation

A built-in appliance includes provision for a furniture door and hinges. A freestanding machine can only be installed under a worktop if the specified conditions are met. Removing a cover requires permission and the specified accessories, where available.

Check the space before sliding the machine into place

  1. Compare the dimensions and clearances with the installation drawing.
  2. Check the plinth, hinges and front panel: they must open without hitting or pressing against the appliance.
  3. Allow for the specified clearances and ventilation; do not copy vent grilles from another model.
  4. Route cables and hoses so they are not pinched or strained when the installation is closed up.
  5. Keep the tap, power disconnection point and service points accessible, and leave a way to remove the appliance.

As you slide it into place, make sure a connector does not end up against the wall. The detergent drawer and accessible filter need room to open and be reached, which may conflict with a cabinet door.

If it has a drying function

The drying system in the washer-dryer may have additional environmental and maintenance requirements. A closed door or insufficient ventilation may make the installation non-compliant, even if the wash cycle appears to work.

The cabinet preparation and any new connections must follow the installation drawing and be carried out by the appropriate installer. The positioning guide helps you check that there is full access before fixing the cabinet in place.

Test the openings and check access for servicing before permanently closing up the cabinetry.

View all articles in Washing machine installation: requirements and checks