A tray contains some of the water; a detector senses water where it makes contact; an external valve can shut off the water supply. None of these measures repairs a leak or necessarily covers every route water may take.
What each measure can do
| Measure | Coverage | Main limitation |
|---|---|---|
| Tray without an outlet | Holds a limited volume | May overflow if the leak continues |
| Tray with drainage | Channels collected water to a designated outlet | Depends on installation and drainage capacity |
| Point detector | Sounds an alert when water reaches its sensor | Does not detect water that takes another route |
| External automatic shut-off | Cuts off a supply point when activated | Does not cover leaks upstream of the shut-off or water already present |
Physical compatibility and access
The tray must accommodate the appliance's dimensions, feet and operation without affecting its support. Its edge must not block access to a filter or removal of the appliance for servicing. Position the detector where it can receive water from the area to be protected, in accordance with its instructions.
A tray outlet requires suitable drainage; do not connect it to just any pipe on a hunch, or block drains to prevent odours.
Built-in protection and protection of the surroundings
The machine's leak-protection systems operate within its own design. External measures protect aspects of the installation location. If a protection device repeatedly sounds an alert, find the leak rather than using larger containers so you can keep doing the washing.
Choose each measure according to the route water can actually take for it to be detected or contained.
View all articles in Washing machine installation: requirements and checks
