The cabinet must support the installation specified by the manufacturer and allow for use and maintenance. The fact that the appliance physically fits does not mean you can remove its top cover, conceal connections or reduce clearances.
Confirm the installation type
An integrated appliance has provisions for a furniture panel and hinges. A freestanding machine can be installed under a countertop only if the specified conditions are met. Removing a top cover requires permission and the specified accessories, where available.
Check the space before moving the machine into place
- Compare the dimensions and openings with the installation drawing.
- Check the plinth, hinges and front panel: they must open without hitting or pressing against the appliance.
- Allow for the specified clearances and ventilation; do not copy ventilation grille requirements from another model.
- Route cables and hoses so they are not pinched or strained when the assembly is closed.
- Keep the tap, power-disconnection point and service points accessible, and leave a way to remove the appliance.
As you push it into place, make sure a fitting does not end up against the wall. The detergent drawer and accessible filter need room to open and be reached, which may interfere with a furniture door.
If it has a drying function
The washer-dryer's heating system may have additional environmental and maintenance requirements. A closed door or insufficient ventilation may make the installation non-compliant even if the wash cycle appears to work.
Any carpentry work and new connections must follow the drawing and be carried out by the appropriate installer. The installation guide helps you check that there is full access before securing the cabinet.
Test the openings and access for servicing before permanently closing off the cabinet.
View all articles in Washing machine installation: requirements and checks
