Measure the space the washing machine needs when closed and the space it occupies when in use. The space must allow for connections, opening and access for servicing, as well as passage along the route into the room.
Take measurements using the manufacturer’s drawing
- Note the width, height and depth, and identify what each measurement includes: cabinet, door, controls and protrusions.
- Mark the path of the open door or lid and the space needed to access the drum without obstruction.
- Allow the clearances specified for hoses, cable, ventilation and spacing from furniture.
- Check that the detergent drawer can open and that the filter or available maintenance point can be accessed.
- Measure the doors, corridors, lift and turns the appliance must pass through to get in or out.
A quoted depth may refer to the cabinet alone. Pushing the machine all the way back until it fits could kink a hose or leave no room for a connection.
What to check at the installation site
The space may vary in width from front to back, or have skirting boards and pipes that reduce the usable area. Measure at several points and use the most restrictive measurement, allowing for the installation tolerances. Do not assume that a door is reversible.
To convert dimensions, 1 inch is exactly 2.54 cm. Keep enough precision when converting, and do not round in a way that removes a necessary clearance.
Installations with additional requirements
An integrated cabinet adds panels and hinges; stacking adds height and servicing requirements for the combined unit. Also plan for moving: the final space alone does not solve the access problem.
Check the actual measurements of the route and installation space against the complete installation diagram, not just a single width measurement.
View all articles in Washing machine capacity and dimensions: how to interpret the figures
