The temporary connection must be suitable for both the washing machine and the tap. Not every aerator, pull-out mixer tap or sink can take a fitting that remains under mains water pressure.
Identify the portable system
It may use a quick connector that combines the water inlet and drain, separate hoses, or a tank that avoids connecting to the tap. The appliance’s functions and its manual determine how it should be set up; do not copy the installation for a different portable model.
Checks before connecting
- Check that the tap type and connection are approved by the manufacturers of the adapter and appliance.
- Check for restrictions on pull-out spray heads or mixer tap accessories.
- Check the condition of the seals and the mechanism that secures the connector.
- Make sure the sink is clear and can drain the expected flow without overflowing.
- Place the appliance on a stable surface and ensure the electrical supply is suitable and kept away from spills.
With the water turned off, install the adapter and secure the outlet in the documented order. The drain hose must not come loose from the force of the draining water, or be submerged if the instructions for the installation prohibit this.
While in use and when disconnecting
Keep the tap accessible and check the connections from the outside. If you notice a leak, stop the cycle using the specified procedure and turn off the water safely.
To disconnect the appliance, follow the manual’s instructions for turning off the water, releasing the pressure and removing the connector. Do not pull on the connector while it is under pressure, or immerse the appliance or cable when clearing residual water. The hoses and seals should be stored without being bent out of shape.
Check that the tap, connector and drain are all compatible before treating the connection as safe for temporary use.
View all articles in Washing machine installation: requirements and checks
