The cabinet must support the installation specified by the manufacturer and allow for use and maintenance. The fact that the appliance physically fits does not authorize removing its top, concealing connections or reducing clearances.
Confirm the installation type
A built-in model includes provisions for a cabinet panel and hinges. A freestanding machine can only be installed under a countertop if the specified conditions are met. Removing a top requires permission and the specified accessories, if available.
Check the space before moving the machine into place
- Compare dimensions and clearances with the installation diagram.
- Check the toe kick, hinges and front panel: they must open without hitting or pressing against the appliance.
- Allow for the specified clearances and ventilation; do not copy the grille design from another model.
- Route cables and hoses so they are not pinched or strained when the installation is closed up.
- Keep the tap, disconnect and service points accessible, as well as a route for removing the appliance.
When pushing it into place, make sure a fitting does not end up against the wall. The detergent drawer and accessible filter need their own clearance, which may interfere with a cabinet door.
If it includes a dryer
The washer-dryer’s heat system may impose other environmental and maintenance requirements. A closed door or insufficient ventilation may make the installation non-compliant, even if the wash cycle seems to work.
Cabinet preparation and any new connections must follow the installation diagram and be handled by the appropriate installer. The placement guide helps you verify full access before securing the cabinet.
Test the openings and service access before permanently closing up the cabinet.
View all articles in Washing machine installation: requirements and checks
