A kitchen, bathroom, utility room or outdoor area is not suitable simply because of its name. The location must meet the environmental, electrical, plumbing and access requirements of the appliance and the local installation.
Assess the location as a whole
Check that the water supply and drainage are compatible, and that there is an electrical supply that is suitable, as well as adequate support and ventilation. The hoses and cable must not be strained by the chosen position.
Damp, rain, frost, heat and direct sunlight can exceed the conditions a domestic appliance is designed for. A partial cover does not prove that the appliance is protected from water or suitable for outdoor use. In bathrooms, location restrictions and the required distance from water must be checked against local regulations with a qualified installer.
Access for people and for servicing
- The door or lid must open sufficiently, and you must be able to reach the back of the load.
- Controls must be visible and reachable without adopting an unsafe posture.
- Allow space to move around with laundry baskets and remove clothes.
- Ensure access to the tap, the means of disconnection and maintenance points.
- The appliance must be removable without improvised dismantling.
The dimensions of the space must allow for these operations. In basements or on upper floors, you must also consider the floor and support and where a potential leak would drain to.
Protecting the space
Drip trays or leak detectors can limit some damage, but they do not make a location suitable if it fails to meet the requirements. A cabinet must allow for ventilation and servicing. Protection during frost or periods of non-use requires measures different from those needed for normal operation.
Choose a location where the appliance can operate, be accessed and disconnected safely—not merely one where its casing will fit.
View all articles in Washing machine installation: requirements and checks
