Washing machine discharge adds water and products to the septic system. The volume and how it is concentrated over time matter, as do the capacity and conditions of the treatment system installed.
Discharge must be compatible with the intended system
Connecting to a septic system, diverting greywater and discharging to the ground are different options. None is permitted simply because the water comes from washing. The person responsible for the installation and the relevant authority must confirm the permitted route.
Volume and timing of loads
A succession of discharges can increase the hydraulic load in a short time. The EPA recommends spreading laundry loads throughout the week to avoid concentrating demand on domestic septic systems. The interval and capacity of your installation need to be assessed individually; there is no universally safe number of cycles per day.
To describe the demand, record water per cycle, usual loads and other coinciding water use. A machine that uses less water under equivalent conditions may reduce the hydraulic input, but that will not fix a drainage field or treatment system that is already failing.
Products and system maintenance
Use compatible products and appropriate doses, following the appliance instructions, product label and recommendations of the person responsible for treatment. Do not add substances intended to compensate for hydraulic overloading, or alter connections to conceal an overflow.
If greywater recovery is being considered, it needs a separate assessment. The waste pipe connection must retain its design, and changes in water use must be checked against actual data.
Give the person responsible for the system data on volumes and frequency; this is more useful than stating only the size of the washing machine.
View all articles in Washing machine installation: requirements and checks
