Transit locks immobilise parts of the appliance during transit. Before use, remove the items specified in the manual; not every visible bolt is part of this system.
Identify the parts before loosening anything
Depending on the model, there may be bolts, brackets, blocks or internal packaging. Their number and position vary. Compare the diagram in the manual with the appliance, and keep the accessories supplied with each transit lock.
Do not remove a casing, counterweight or internal mechanism screw just because it looks like a transit bolt. If you cannot match a part to the instructions, stop unpacking and contact the manufacturer or installer.
Removal and storage
- Keep the appliance unplugged and in a stable position.
- Remove only the items indicated, using the access point and tool specified.
- Retrieve bushes or other parts that form part of the assembly, if the manual says to do so.
- Fit the specified caps and check that no packaging remains in areas used during operation.
- Keep the identified parts with their instructions for the next move.
If the washing machine has already been used with the transit locks in place
Stop using it and consult the inspection guidance. The transit locks can prevent the suspension from moving and cause vibration and banging, but leaving them in place does not in itself confirm that any specific damage has occurred.
Once the locks have been removed and any signs of damage have been addressed, check the feet and levelling and follow the applicable initial test. For another move, follow the transport procedure, which may require the relevant transit locks to be refitted.
Keep each transit lock as a complete set: an incomplete fixing may not work properly during the next move.
View all articles in Washing machine installation: requirements and checks
