A washing machine that bangs or moves needs its support and load checked, but it may also have an internal problem. If the banging is violent, stop the cycle without trying to hold the machine in place.
If it happens from installation
Confirm that the transit bolts have been removed as instructed. Check that the feet are supported and the machine is level while it is switched off. A flexible floor, an unsupported foot or contact with a piece of furniture can affect stability.
Do not remove screws based on their appearance: the documentation identifies which ones are for transport. Do not compensate for an unsuitable floor by placing soft materials underneath without checking that they are compatible.
If it happens only with some loads
A bulky item can hold water and concentrate the weight. When it is safe to open the machine normally, check the load size and distribution. Follow the programme-specific limits, which may be lower than the rated capacity.
The control system may try to redistribute the load and cancel the spin acceleration. Repeating the spin cycle without changing an identified condition will not help and may make the banging worse.
When it fails with suitable loads
If the support was correct and the behaviour has changed, note any bouncing, movement of the drum assembly and noises. The suspension needs to be checked when it does not control the movement; drum play may indicate different damage.
Reducing the spin speed or placing a mat underneath may change the vibration you feel, but it does not prove that mechanical damage has gone away.
Resume use only after you have corrected an identified external condition and there is no banging, rubbing or abnormal movement.
View all articles in Abnormal washing machine noises and vibrations
