A washing machine that bangs or moves needs its support and load checked, but it may also have an internal problem. If the banging is violent, stop the cycle without trying to hold the machine in place.
If it happens from installation onward
Confirm that the shipping bolts have been removed as instructed. Check that the feet are supported and that the machine is level while it is stopped. A flexible floor, an unsupported foot or contact with furniture can affect stability.
Don’t remove bolts based on their appearance: the documentation identifies which ones are for shipping. Don’t compensate for an unsuitable floor by placing soft materials underneath without checking that they’re compatible.
If it happens only with certain loads
A bulky item can hold water and concentrate the weight. When it’s safe to open the machine normally, check the load size and distribution. Follow the specific limits for the programme, which may be lower than the rated capacity.
The controls may try to redistribute the load and cancel the acceleration. Repeating the spin cycle without changing an identified condition won’t help and may make the banging worse.
When it happens with suitable loads
If the machine was properly supported and its behaviour has changed, note any bouncing, movement of the assembly and noises. The suspension system needs to be checked if it isn’t controlling the movement; play in the drum can indicate different damage.
Reducing the spin speed or placing a mat underneath may change how much vibration you feel, but it doesn’t prove that mechanical damage has gone away.
Resume use only after correcting an identified external condition and confirming there’s no banging, rubbing or abnormal movement.
