Washing machine shock absorbers, rods, springs and counterweights

The suspension must support the tub and control its movement. Before blaming the shock absorbers or rods, rule out external support and the load; then identify the exact system.

Which assembly the model uses

There may be springs and shock absorbers, rods in top-loading designs, and counterweights with their own fixings. Not all parts serve the same function or are replaced using the same access route.

The general vibration and the dropped drum provide context. Pressing down on the tub by hand is not a valid rebound test for every design.

What the inspection should check

The assembly’s position, fixings, the integrity of the springs and rods, and signs of poorly controlled oscillation. A cracked counterweight or damaged mounting requires the support to be assessed, not just tightened further.

The Electrolux spring procedure shows that positions and supports must be preserved. The spring’s stored energy and the weight suspended from it mean that this work requires appropriate equipment and competence.

Selection and fitting

The assembly must be compatible with the product. Whether to replace all units, just one, or use a kit depends on the documentation; there is no universal rule.

Do not improvise counterweight pairs or use lubricants to alter the damping. After fitting, check the position, freedom of movement and response under the specified test conditions. The function of the suspension helps explain what is being validated.

If a fixing or the material supporting it is damaged, tightening alone will not restore the attachment.

View all articles in Washing machine component diagnosis and repair