A roar that gets louder as the machine speeds up may be related to support or drive components. The sound alone does not confirm that the bearings need replacing.
Distinguish roaring from banging
Describe whether the noise is continuous and follows the speed, or consists of separate impacts. It also matters whether it started gradually, appeared after the appliance was moved, or coincides with visible play.
You do not need to repeat a high-speed spin to prove that the sound gets louder. Use observations you have already made, and stop using the machine if the noise is accompanied by rubbing, movement or an abnormal drum position.
What turning the drum by hand can tell you
With the washing machine unplugged and opened using the normal procedure, a gentle check may reveal roughness if the design allows the drum to be turned by hand. Do not force brakes or drive components that are meant to resist movement.
If the sound is also present in this condition, it points towards mechanical parts, but you still need to distinguish between bearings, parts making contact and drive mechanisms. If there is play or misalignment, describe it as a second symptom.
What an inspection should confirm
Bosch lists bearings and other internal components among the possible causes in its washing machine noise support. The technician needs to identify the worn part and check the condition of the shaft, seals and associated supports. The repair should not be chosen based on the comparison “it sounds like an aeroplane”, as different faults can sound similar.
Do not apply lubricant from the outside to quieten a sealed bearing. Temporarily reducing the noise would not prove that the support is still in good condition.
Ask for the component and associated damage to be identified before agreeing to replace the bearings based on sound alone.
View all articles in Abnormal washing machine noises and vibrations
