A washing machine that bangs or moves needs its support and load checked, but it may also have an internal fault. If the banging is violent, stop the cycle and don’t try to hold the machine in place.
If it happens from installation
Check that the transit bolts have been removed as specified. Check that the feet are supported and that the machine is level while it is switched off. A flexible floor, an unsupported foot or contact with a cabinet can affect stability.
Don’t remove bolts based on appearance alone: the documentation identifies which ones are for transit. Also, don’t compensate for an unsuitable floor by placing soft materials underneath without checking that they are compatible.
If it happens only with certain loads
A bulky item can hold water and concentrate the weight. When it is safe to open the machine normally, check the load size and distribution. Follow the specific limits for the programme, which may be lower than the rated capacity.
The controls may try to redistribute the load and cancel the acceleration. Repeating the spin cycle without changing an identified condition won’t help and may make the banging worse.
When it happens with suitable loads
If the machine was properly supported and its behaviour has changed, note any bouncing, movement of the assembly and noises. The suspension needs to be checked when it no longer controls movement; excessive play in the drum can indicate different damage.
Reducing the spin speed or placing a mat underneath may change how much vibration you feel, but it doesn’t prove that mechanical damage has gone away.
Resume use only after you have corrected an identified external cause and there is no longer any banging, scraping or unusual movement.
View all articles in Abnormal washing machine noises and vibrations
