
To interpret a noise, consider its type alongside the cycle stage and the movement you observe. A thump, a roar and a hum call for different checks.
Dominant sound
| Sound or movement | Related guide |
|---|---|
| Thumping and shifting during acceleration | Excessive vibration and rocking |
| A continuous roar that gets louder as the speed increases | Loud spin-cycle noise |
| Scraping or rattling with each rotation | Metallic rubbing and objects |
| Humming without water entering, movement or draining | An operation that does not take place |
A noise can travel through the casing and seem to come from somewhere else. You cannot identify a part just because the sound seems to come from nearby.
Before suspecting an internal fault
With the washer stopped, check for visible objects in the laundry, contact with furniture, and external hoses hitting the casing. If it started after installation, note that; if it gradually got worse, describe how it changed.
Do not push an object out of sight. Retrieving an object from between the drum and tub depends on authorized access and may require a technician.
When to stop
Violent thumping, shifting, continuous rubbing against the seal, an odour or smoke are reasons to stop using the washer. Do not hold the washer while it is spinning or remove panels to get closer to the motor.
Frequently Asked Questions
Does a new sound always mean a part needs to be replaced?
No. It may come from a buckle, contact with a piece of furniture or a normal operation that you had not noticed before. Whether it persists and what other signs are present will determine whether it needs to be checked.
How can I record a noise so it is useful for diagnosis?
Record it from outside without moving the machine or removing panels, and note when it happens. Do not run another test if there is already thumping, heavy rubbing or signs of an electrical issue.
Why does the noise change during different stages of the cycle?
Water intake, pumping and wash movements use different circuits. The speed also increases during the spin cycle, so the sound’s intensity may change.
A recording made from a safe position can help; include the cycle, stage and load so the sound has context.




