If an object has slipped out of the drum, stop using the washing machine. It should only be retrieved through an accessible, authorized route; internal access may require technical disassembly.
First, confirm what has gone missing
Check the removed laundry, the visible interior and the accessible folds of the door seal, with the machine unplugged. Use a light, and don’t put your fingers anywhere you can’t see. If the object has sharp edges or is stuck, don’t pull it forcefully.
A coin or metal piece may also still be in the laundry or drum. Friction or rattling doesn’t confirm that it’s between the tub and drum.
Access points depend on the model
The filter, a removable paddle or a maintenance opening is a recovery route only if the manufacturer specifies it. Before opening a drain access point, follow the safe draining. Not all machines have a user-accessible filter.
Don’t remove the heating element or open an internal hose based on generic instructions. Reassembly requires restoring the seal, fastening and position; an improperly closed access point can cause a leak.
When to arrange a technical inspection
If the object isn’t visible, the drum meets resistance, part of a paddle is missing, or the door seal is damaged, keep the appliance disconnected. Give the service technician a description of the object and the noise you heard.
Don’t push through the holes or run a spin cycle to eject it. A fragment could move into an area that’s more difficult to access.
After retrieving the piece, check that it’s complete; if a fragment is missing, continue the inspection before using the machine again.
