How much laundry to put in the washer and how to distribute it

The permitted load depends on the cycle and the items, not just the advertised kilogram capacity. The laundry must fit and move as described in the manual; being able to close the door does not mean the load is suitable.

Dry weight and volume answer different questions

When capacity is stated in kilograms of dry laundry, compare it with that weight; don’t interpret the figure as a limit for already soaked laundry. Then check the cycle’s maximum load: wool, quick wash or drying cycles may allow less than the reference cycle.

A lightweight, bulky item can take up the available space before reaching the permitted weight. A compact, absorbent item can be difficult to distribute. For duvets and blankets, also check the requirements for the individual item.

Load according to the washer’s design

In a front-load washer, add laundry without wedging it against the door. In a top-load washer, follow the manufacturer’s instructions for placing laundry around the agitator or on the impeller. Don’t wrap a long item around a central component or press down to fit more in.

The rule about leaving a hand-sized gap doesn’t apply to every cycle and design. Use the load guidelines in the manual.

Small loads and imbalance

A single item can bunch up during the spin cycle. Check whether the washer allows that load and what correction it recommends; don’t add items as ballast. If you need to redistribute the load, wait until the washer has stopped and it’s safe to open.

Compressed laundry, uneven cleaning and tangling are reasons to check the load size, but don’t by themselves confirm a fault. Persistent banging and movement require diagnosis when the load already follows the instructions.

Decide on the load before starting; redistributing it afterwards doesn’t make an oversized or excluded item suitable.

View all articles in Prepare, sort and load laundry