The suspension must support the tub and control its movement. Before blaming the shock absorbers or rods, rule out external support and load issues; then identify the exact system.
Which assembly the model uses
There may be springs and shock absorbers, rods in top-load designs, and counterweights with their own fasteners. Not all parts serve the same function or are replaced using the same access method.
The general vibration and the sagging drum provide context. Pressing down on the tub by hand is not a valid bounce test for every design.
What the inspection should check
Assembly position, fasteners, the condition of the springs and rods, and signs of poorly controlled oscillation. A cracked counterweight or damaged fastener calls for an assessment of the support, not just more tightening.
The Electrolux spring procedure shows that positions and supports must be preserved. The spring's stored energy and the weight of the suspended assembly mean that this work requires appropriate equipment and expertise.
Selecting and installing parts
The assembly must be compatible with the product. Whether to replace all units, just one, or use a kit depends on the documentation; there is no universal rule.
Don't improvise counterweight pairs or use lubricants to alter the damping. After installation, check the position, freedom of movement and response under the specified test conditions. The function of the suspension helps explain what is being validated.
If a fastener or the material supporting it is damaged, tightening alone will not restore the secure fit.
