Shipping bolts and restraints: how to identify and remove them

Shipping restraints immobilize parts of the appliance during transport. Before use, remove the items specified in the manual; not every visible screw is part of this system.

Identify the parts before loosening anything

Depending on the design, there may be bolts, brackets, blocks or internal packaging. The number and location vary. Compare the diagram in the manual with the appliance, and keep the accessories that go with each restraint.

Do not remove a cabinet, counterweight or internal mechanism screw just because it looks like a shipping bolt. If you cannot match a part to the instructions, stop unpacking and contact the manufacturer or installer.

Removal and storage

  1. Keep the appliance unplugged and placed on a stable surface.
  2. Remove only the items indicated, using the specified access point and tool.
  3. Retrieve bushings or other parts that are part of the assembly, if the manual specifies this.
  4. Fit the specified caps and check that no packaging remains in areas used during operation.
  5. Store the identified parts with their instructions for the next move.

If the washer has already been used with the restraints in place

Stop using it and consult the inspection instructions. The restraints can prevent the suspension from moving and cause vibration and banging, but leaving them in place does not, by itself, confirm any specific damage.

Once the restraints have been removed and any signs of damage addressed, check the supports and levelling and follow the applicable initial test. For another move, use the transport procedure, which may require reinstalling the applicable restraints.

Keep each restraint as a complete set: an incomplete fastening may not do its job during the next move.

View all articles in Washing machine installation: requirements and checks