The perforated drum you can see is not the whole washing area: the tub surrounds it and is not usually accessible. Cleaning involves gently removing visible debris and running the empty treatment approved for your model.
What you can inspect without dismantling anything
Empty the machine, wait for the door to unlock and let it cool down. Isolate the power supply before removing debris by hand. Use a good light to inspect the perforated surface, the paddles and the opening. Remove visible objects that come away without pulling on any mechanisms; don't put tools through the holes or under the paddles.
A shiny drum can still have deposits in hidden areas. Likewise, a water mark does not confirm that there is a build-up on the heating element. Describe what you can see — film, powder, scale or a fixed stain — before choosing a product.
Surface cleaning and cleaning the system
- Wipe up loose debris with a soft cloth that is suitable for the finish. Don't repeatedly drag hard particles across the metal.
- If dirt is stuck on, use only the surface-cleaning method specified in the manual; avoid metal scourers and scrapers.
- Replace any maintenance parts you removed and run the internal cleaning cycle using the specified product and application conditions.
- When the cycle finishes, check whether any deposits or flakes have come loose and remove any you can reach. Any rinse or repeat cycle should follow the instructions, not turn into an endless series of cycles.
Choose the treatment to suit the deposit
Descaling targets minerals; a greasy film should not be treated as limescale just because it is white. Stains that may be associated with damp-related contamination should be checked for mould and slimy deposits, without trying to identify microorganisms by their colour.
If the build-up does not decrease, material resembling a deteriorated part appears, or there is rubbing, a leak or a malfunction, arrange an inspection. Cleaning the tub using the cycle does not confirm the condition of all its internal components.
For a complete machine clean, follow the front loader or top loader sequence; this check is limited to the washing area.
View all articles in Which washing machine components to clean and how to identify them
