Descale when water conditions, deposits and your model’s instructions justify the treatment. Use a compatible product and follow the complete procedure; don’t treat every white residue as limescale.
Before choosing a descaler
Gather information about water hardness, maintenance history and what you observe. A greasy film or detergent residue may need a different cleaning treatment. Bosch distinguishes between a mineral descaler and a cleaner for greasy residue and asks you to follow the instructions on each product.
If you’re enquiring because the machine isn’t heating or has a fault, don’t use descaling to diagnose the heating element. You can’t fully inspect its surface from inside the drum.
Preparation and application
- Check that the product is suitable for your machine type and its materials. Check the manual and product label for any restrictions.
- Empty the washing machine and remove any visible residue that isn’t part of the limescale. Make sure there are no other products left in the system.
- Apply the specified amount in the designated place. Don’t assume the descaler goes in the detergent drawer.
- Run the approved programme and let it complete all its stages.
- Run any rinses required by the treatment before washing clothes again.
Don’t mix descaler with chlorine or try to make it more effective by adding household acids. If another substance has been used or you’re unsure about residue, check product safety before you start.
Check the result without opening the machine
Check accessible surfaces and see whether any residue needs to be removed. Don’t assume from the appearance that the entire heating element is free of deposits. If the build-up persists, check whether the manufacturer allows another application; don’t increase the concentration or temperature.
If the deposits return, review water prevention and treatment. Corrective treatment frequency should depend on the appliance and water supply conditions; don’t treat one brand’s recommended interval as a universal rule.
Completing a descaling treatment completes the approved treatment; it doesn’t certify the internal condition of every component or guarantee that a particular level of performance will be restored.
View all articles in Limescale and water quality: caring for your washing machine
