Cleaning the drum and tub: accessible surfaces and internal areas

The perforated drum you can see is not the entire wash area: the tub surrounds it and is usually inaccessible. Cleaning involves gently removing visible debris and running the empty cleaning treatment approved for your model.

What you can inspect without taking anything apart

Empty the machine, wait for the door to unlock and let it cool. Before removing debris by hand, disconnect the power supply. Examine the perforated surface, the paddles and the opening in good light. Pick up visible objects that come away without pulling on any mechanisms; do not put tools through the holes or under the paddles.

A shiny drum can still have deposits in hidden areas. Likewise, a water mark does not confirm that there is a buildup on the heating element. Describe what you see—film, dust, scale or a fixed stain—before choosing a product.

Surface cleaning and cleaning the system

  1. Wipe up loose debris with a soft cloth that is compatible with the finish. Avoid repeatedly dragging hard particles across the metal.
  2. If dirt is stuck on, use only the surface-cleaning method specified in the manual; avoid metal scouring pads and scrapers.
  3. Replace any maintenance part you removed and run the interior cleaning cycle under the specified product and application conditions.
  4. When it is done, check whether any deposits or flakes have come loose and remove what you can reach. Any rinsing or repeat cycle should follow the instructions, not turn into an endless series of cycles.

Choose a treatment based on the deposit

Descaling targets minerals; a greasy film should not be treated as limescale just because it is white. Stains that may be related to damp contamination require checking for mould and slimy deposits, without identifying microorganisms by colour.

If the buildup does not diminish, material resembling a deteriorated part appears, or there is rubbing, a leak or a malfunction, request an inspection. Running the tub-cleaning cycle does not confirm the condition of all internal components.

For a complete machine cleaning, follow the front-load or top-load sequence; this inspection is limited to the wash area.

View all articles in Which Washing Machine Components to Clean and How to Identify Them