Miele TwinDos system maintenance and cleaning

TwinDos maintenance cleans the dosing lines using a function built into the washing machine. Check which compartment is specified and use the approved cleaning product: cleaning the drum does not necessarily clean this circuit.

What the maintenance alert means

Miele explains that when TwinDos is not used, detergent can dry in the tubes and that its maintenance programme cleans these lines. The alert may refer to a specific compartment; don’t assume both need to be treated in the same way.

Prepare the procedure for your model range

  1. Identify your model and check the TwinDos section of the manual. Confirm whether the message refers to compartment 1, compartment 2 or both.
  2. Check which cleaning cartridge or container the machine accepts. Don’t improvise a refill or assume the contents based on chemical equivalence.
  3. Prepare the machine and position the container as instructed. Check that it is seated correctly before starting.
  4. Find TwinDos maintenance in the relevant menu, select the specified line and follow the sequence shown on the display.
  5. Allow the process to finish, then follow the instructions for removing and replacing the laundry product.

Menu names and control layouts vary between model ranges. If your display doesn’t match, look up your model’s manual rather than trying a button combination from another washing machine.

After maintenance

Check that the process is marked as complete and that the usual container is installed correctly. If the process wouldn’t start or finish, note the exact message and where it stopped before contacting support.

Don’t repeat the process indefinitely or try to clear blocked tubes with pressure or solvents. To distinguish this task from cleaning a removable container, see automatic dosing maintenance.

If you’re going to stop using TwinDos for a while, check the instructions for storing the machine and schedule maintenance of its lines before the machine is unused, if the manual says to do so.

View all articles in Which washing machine components to clean and how to identify them