Residue that appears during a clean may be deposits that have come loose, but its black colour does not prove that it is mould. Collect what you can see and check whether the material decreases or appears to be coming from a damaged part.
Observe the residue without assuming its cause from its colour
With the machine empty, switched off and cool, check what remains in the drum and around the rim. A soft sheet, a clump of detergent and an elastic fragment are not the same kind of observation. You do not need to dissolve them to describe them; note their appearance, quantity and when they appear.
If there are fragments that look like rubber, metal or plastic, inspect only the visible parts. A new noise, rubbing or a leak changes what to prioritise: avoid running more cycles until you have checked whether something is deteriorating.
What to do after a clean releases deposits
- Remove accessible residue with a soft cloth or the method in the manual, without pushing it through the perforations.
- Check the surfaces and approved filters or collectors where residue may have built up.
- Complete the rinse specified for the treatment. If the manufacturer recommends repeating the clean, follow that specific advice.
- Inspect the empty machine again and compare the amount of residue. Do not put clothes in to collect what remains.
The drum-cleaning cycle determines whether to repeat the clean. If the residue does not decrease, do not keep switching to stronger cleaners: arrange an inspection and share your observations.
Distinguish cleaning from prevention
A build-up of detergent means you should check the detergent dosage once the machine is clean. For widespread damp film, see mould and biofilm. If the deposit looks mineral, use the limescale and water assessment before choosing an acid.
Cleaning the drum and tub deals with residue inside the machine. If you only see marks on clothes and no residue inside, follow the clothing stain check: do not assume every mark comes from dirt in the tub.
Keep a description or photo of the residue for support if it continues. You do not need to dismantle the drum to document what is happening.
View all articles in Washing machine smells bad: identify the source and get rid of it
