How to thoroughly clean a front-loading washing machine

For a front loader, first remove debris from the opening and accessible parts, refit them, then run the approved cleaning cycle with the machine empty. The door seal and dispenser need to be checked separately.

Prepare the machine and access

Empty the drum and check the maintenance sequence for your model. Before doing any manual tasks, stop the machine, disconnect it from the power supply and let it cool sufficiently. Have cloths and a container ready if you’re attending to the drainage. Don’t move a built-in or stacked washing machine to reach a part unless you have a safe procedure for doing so.

The Panasonic front-loader guide covers the drawer, tub, door seal and filter separately: these are areas to check, not parts of the same chemical wash.

Cleaning steps

  1. Opening: check the glass and folds of the door seal. Remove visible lint or objects, and follow the rubber seal cleaning procedure without pulling on it.
  2. Dispenser: check the compartments and housing. If it needs cleaning, follow the manual drawer-cleaning procedure using only the parts approved for the task.
  3. Drainage: attend to the pump filter only if your manual says it can be accessed at home. Don’t open the cap while water is trapped or hot; first complete the draining procedure specified in the manual.
  4. Washing area: remove visible deposits from the drum. Don’t insert utensils through its holes.
  5. Empty cycle: refit all parts and run the cleaning programme with or without a cleaning product, as specified for your machine.

Check the result

When the cycle finishes and the door unlocks, check the rim and folds for any new residue. Remove it using an approved method; repeat the cycle or add a rinse only if the instructions allow it. Check that any joints you handled stay dry during the test.

If a mark won’t come off, don’t scrape the door seal. If you find cracks, leaks or persistent build-up somewhere you can’t reach, arrange to have that area assessed.

Finish the sequence with all parts properly refitted and no treatment residue left behind. Airing the machine afterwards helps maintain the result.

View all articles in How to clean your washing machine by type