Mould and biofilm in the washing machine: cleaning and preventing recurrence

If you find marks that could be mould or slimy deposits, check all accessible damp areas and remove the residue using the method specified for your model. Colour and texture cannot identify microorganisms or confirm they have been eliminated.

Don’t limit your inspection to one mark

Check the seal, dispenser, housing and drum. Note whether the residue is on one surface or several. A film can contain a mixture of detergent, dirt and biological matter; calling every residue biofilm does not clarify what it is made of.

Panasonic recommends tub maintenance for persistent mould and refers users to the manual for cleaning instructions. The commercial name of an automatic function does not prove that every corner has been sanitised.

Remove accessible build-up

  1. Leave the machine empty and cold, and disconnect it from the power supply before manual cleaning. Use the protective equipment specified for the product.
  2. Collect loose residue without spreading it to other areas. Clean the folds of the seal and the dispenser drawer using the access points provided.
  3. Use only a cleaner approved for the material and appliance. Don’t combine treatments or leave the product on for longer to deal with a stubborn mark.
  4. Complete the internal cleaning specified for your model, followed by the prescribed rinse.
  5. Check the surfaces once the task is complete and they are dry. Describe what residue was removed and what colour remains.

Reduce recurrence

Managing moisture after washing should go hand in hand with removing residue. Unloading the washing promptly and avoiding product residue in the seal folds and dispenser make it easier to see whether an area gets dirty again. Don’t use air fresheners to assess cleanliness.

If deposits reappear from enclosed spaces, a seal is damaged, or the build-up persists despite approved cleaning, request a service inspection. Don’t open the tub to reach a surface that isn’t part of user maintenance.

If the aim is disinfection, check separately that the method is approved and that the required conditions of use are met. Removing a mark does not prove sterilisation.

Compare the same area after several uses. How quickly and where the residue reappears can help you decide whether accessible maintenance is needed or the system needs to be inspected.

View all articles in Washing machine smells bad: identify the source and get rid of it