Cleaning the drum and tub: accessible surfaces and internal areas

The perforated drum you can see is not the whole washing area: it is surrounded by the tub, which is not usually accessible. Cleaning involves gently removing visible debris and running the empty cleaning treatment approved for your model.

What you can inspect without dismantling

Empty the machine, wait for the door to unlock and allow it to cool. Isolate the power supply before removing residue by hand. Inspect the perforated surface, the paddles and the opening in good light. Remove visible objects that come away easily; do not push tools through the holes or beneath the paddles.

A shiny drum can still have deposits in hidden areas. Similarly, a water mark does not confirm a build-up on the heating element. Describe what you can see — a film, dust, scale or a fixed stain — before choosing a product.

Surface residue removal and circuit cleaning

  1. Recoge los restos sueltos con un paño suave compatible con el acabado. No arrastres partículas duras repetidamente por el metal.
  2. Si hay suciedad adherida, aplica únicamente el método superficial indicado en el manual; evita estropajos metálicos y raspadores.
  3. Recoloca cualquier pieza de mantenimiento retirada y ejecuta el programa de limpieza interior con sus condiciones de producto y aplicación.
  4. Al finalizar, comprueba si se han liberado depósitos o escamas y recoge lo alcanzable. Un aclarado o una repetición deben ajustarse a las instrucciones, no a una cadena indefinida de ciclos.

Choose the treatment according to the deposit

Descaling targets minerals; a greasy film should not be treated as limescale simply because it is white. Stains consistent with damp contamination call for checking for mould and slimy deposits, without identifying microorganisms by their colour.

If the build-up does not lessen, material resembling a deteriorated component appears, or there is rubbing, a leak or an operating fault, arrange an inspection. Cleaning the tub using the programme does not certify the condition of all its internal components.

For a complete clean of the machine, follow the front-loading or top-loading sequence; this check is limited to the washing area.

View all articles in Which washing machine components to clean and how to identify them