Cleaning the drum and tub: accessible surfaces and internal areas

The perforated drum you can see is not the entire washing area: the tub surrounds it and is not usually accessible. Cleaning combines gentle removal of visible residue with an empty-cycle treatment approved for the model.

What you can inspect without dismantling

Empty the machine, wait for the door to unlock and let it cool down. Before removing residue by hand, disconnect the power supply. Examine the perforated surface, paddles and opening in good light. Pick out visible objects that come away without pulling on any mechanisms; do not poke tools through the holes or under the paddles.

A shiny drum can still have deposits in hidden areas. Likewise, a water mark does not confirm that there is build-up on the heating element. Note what you can see — a film, dust, scale or a fixed stain — before choosing a product.

Surface residue removal and cleaning the circuit

  1. Wipe up loose debris with a soft cloth that is suitable for the finish. Do not repeatedly drag hard particles across the metal.
  2. If dirt is stuck on, use only the surface-cleaning method specified in the manual; avoid metal scouring pads and scrapers.
  3. Refit any removed maintenance part and run the interior cleaning programme under the specified product and application conditions.
  4. When finished, check whether any deposits or flakes have come loose, and remove what you can reach. Rinsing or repeating the cycle should follow the instructions, not become an endless series of cycles.

Choose the treatment based on the deposit

Descaling targets minerals; a greasy film should not be treated as limescale simply because it is white. Stains that may be related to damp contamination call for checking for mould and slimy deposits, without identifying microorganisms by their colour.

If the build-up does not decrease, material resembling a deteriorated part appears, or there is rubbing, a leak or a malfunction, arrange an inspection. Cleaning the tub using the programme cannot certify the condition of all its internal components.

For a complete machine clean, follow the front-load or top-load sequence; this check is limited to the washing area.

View all articles in Which Washing Machine Components to Clean and How to Identify Them