Transit restraints immobilise parts of the appliance during transport. Before use, remove the items specified in the manual; not every visible bolt is part of this system.
Identify the parts before loosening anything
Depending on the model, there may be bolts, brackets, blocks or internal packaging. Their number and location vary. Compare the diagram in the manual with the appliance, and keep the accessories that accompany each restraint.
A casing, counterweight or internal mechanism screw should not be removed just because it looks like a transit bolt. If you cannot match a part to the instructions, stop unpacking and contact the manufacturer or installer.
Removal and storage
- Keep the appliance unplugged and positioned securely.
- Remove only the items specified, using the access point and tool provided for.
- Retrieve bushes or other parts that form part of the assembly, if the manual specifies this.
- Fit the plugs provided and check that no packaging remains in areas used during operation.
- Store the identified parts with their instructions for the next move.
If the washing machine has already been used with the restraints in place
Stop using it and check the inspection instructions. The restraints may prevent the suspension from moving and cause vibration and banging, but leaving them in place does not by itself confirm any specific damage.
Once the restraints have been removed and any signs of damage addressed, check the feet and levelling and follow the applicable initial test. For another move, follow the transport procedure, which may require the relevant restraints to be reinstalled.
Keep each restraint as a complete set: an incomplete fixing may not do its job during the next move.
View all articles in Installing a washing machine: requirements and checks
