Pressure and flow requirements: washing machines with a tank or irregular water supply

The washing machine needs to meet its model’s pressure and flow requirements while water is entering. A tap that has pressure when no water is flowing may not deliver enough water once it is opened.

Three measurements to distinguish

  • Static pressure: the supply condition when no water is flowing to that point of use.
  • Operating pressure: the pressure available while the machine and other outlets are using water.
  • Flow rate: the amount of water that can be delivered per unit of time.

An elevated tank provides a supply condition that depends on the height difference and losses along the route. Knowing the tank’s capacity is not enough. A pump is assessed at its operating point, not just by its rated power.

What information to gather

Find the appliance’s limits and note the water source, times when supply is interrupted, simultaneous water use and changes in flow rate. If the installation needs to be measured or modified, a professional should use the appropriate measuring point and method, without improvising tests near electrical connections.

Also check hoses and fittings and water source quality. Dirt or a deformed pipe can restrict flow, but if a new installation has an inadequate supply, it needs a supply solution—not the disabling of the fill detection.

Automatic and manual filling

A semi-automatic machine may allow manual filling if it is designed for it. Adding water manually to an automatic machine that is not designed for this does not replace meeting its requirements.

Knocking in pipes when water is turned on or off should be treated as a plumbing problem; it is not the same as the drum knocking. If the supply used to work and filling behaviour has changed, continue with the inlet diagnosis.

Ask for the water supply to be checked against the exact limits in the manual; there is no tank height or pump power that suits every machine.

View all articles in Installing a washing machine: requirements and checks