Connect each inlet to the supply specified in the manual. Having only one water outlet in your home does not mean a washing machine with two inlets will work with the other port capped or connected using any kind of splitter.
Identify the inlets and requirements
A machine may be designed for cold water, separate cold and hot water inlets, or a special documented supply. The connection markings and manual should confirm what each port takes, as well as the temperature and pressure limits.
On some machines, both inlets are used during cycles that users might consider cold or warm. The Whirlpool documentation for machines with two inlets requires both connections in its specific context; this requirement does not apply to every appliance with two ports.
What can happen if you swap them
The control may receive water that differs from what it expects, alter the mix, or fail to reach the intended temperature. This affects both the load and the components and stages involved. If an inlet does not work after connection, the cold- or hot-water troubleshooting guide can help distinguish an installation issue from a fault.
Preheated water and energy balance
The heat used for washing may come from the appliance or an external supply. Connecting water from a hot-water system or solar system is only appropriate if approved for those conditions. It does not guarantee savings: the available temperature, heat lost through the pipes and energy used outside the machine all matter.
If there is only one outlet, check for an approved solution before modifying pipes or joining ports. The hose connection must retain the seals, compatibility and access. When calculating consumption, also count external energy when it is part of the wash.
Check that the water supply is compatible before choosing adapters; changing the programme settings will not correct an incorrect plumbing connection.
View all articles in Installing a washing machine: requirements and checks
