Transport screws and locks: how to identify and remove them

Transport locks immobilise parts of the appliance during transit. Before use, remove the items specified in the manual; not every visible screw is part of this system.

Identify the parts before loosening anything

Depending on the model, there may be bolts, brackets, blocks or internal packaging. Their number and position vary. Compare the diagram in the manual with the appliance, and keep the accessories that go with each lock.

Do not remove a casing, counterweight or internal mechanism screw just because it looks like a transport bolt. If you cannot match a part to the instructions, stop unpacking and contact the manufacturer or installer.

Removal and storage

  1. Keep the appliance unplugged and positioned securely.
  2. Remove only the items indicated, using the access point and tool specified.
  3. Retrieve sleeves or other parts that form part of the assembly, if the manual instructs you to do so.
  4. Fit the specified caps and check that no packaging remains in areas used during operation.
  5. Store the identified parts with their instructions for the next move.

If the washing machine has already been used with the locks in place

Stop using it and follow the inspection instructions. The locks can prevent the suspension from moving and cause vibration and banging, but leaving them in place does not, by itself, confirm any specific damage.

Once the locks have been removed and any signs of damage have been addressed, check the feet and levelling and follow the applicable initial test. For another move, use the transport procedure, which may require the relevant locks to be reinstalled.

Keep each lock as a complete assembly: an incomplete fastening may not do its job during the next move.

View all articles in Washing machine installation: requirements and checks