Water leaks from the detergent drawer

If water or suds spill out of the detergent drawer, stop the cycle and check the drawer’s position, any residue and the product used. Water left inside after the wash is a different situation.

Check what’s overflowing

Note whether it’s mostly suds or water, and whether it happens at the start, during the prewash or when the fabric softener is dispensed. Check whether you changed products, increased the dose or recently removed the drawer.

Excessive sudsing can be associated with an unsuitable dose, but it doesn’t explain every leak on its own. If water overflows without suds, the path connecting the dispenser to the tub also needs to be checked.

Accessible checks

With the appliance disconnected, check that the drawer and its inserts are properly seated. Follow the instructions for cleaning the detergent drawer and siphon for your model; don’t insert wires into internal outlets or remove the dispenser assembly from above.

If it started after installation, note any changes to the water supply or the appliance’s position. Routinely turning down the tap can mask the symptom without fixing a blockage or incorrect installation. Check the inlet requirements in the documentation.

If the overflow continues with the drawer correctly installed

A technician should distinguish between a distribution issue or an inlet valve and a blocked or damaged hose. Don’t replace the drawer based on its appearance without identifying the cause.

Don’t leave the dispenser open during a test to watch the water flow; note when the overflow happens from outside the appliance.

View all articles in Washing machine water leaks: find the source