Water comes out of the detergent drawer

If water or foam spills out of the drawer, stop the cycle and check how it is fitted, for residue and for the product used. Water left inside after the wash is a different issue.

Note what is overflowing

Note whether it is mainly foam or water, and whether it happens at the beginning, during the prewash or when the fabric softener is dispensed. Check whether you have recently changed the product, increased the dose or removed the drawer.

Excessive foam can be associated with an unsuitable dose, but does not in itself explain every leak. If water overflows without foam, the route connecting the dispenser to the drum is also worth checking.

Checks you can carry out

With the appliance isolated from the power supply, check that the drawer and its inserts are seated correctly. Follow the instructions for cleaning the detergent drawer and siphon for your model; do not push wires into internal outlets or dismantle the dispenser from above.

If this started after installation, note any changes to the water supply or the appliance’s position. Turning down the tap as a matter of habit may hide the symptom without resolving a blockage or incorrect installation. Check the water inlet requirements against the documentation.

If the overflow continues with the drawer fitted correctly

The technician should check for a problem with water distribution or the inlet valve and for a blocked or damaged hose. Do not replace the drawer based on its appearance without identifying the cause.

Do not leave the dispenser open during a test to watch the water flow; note when the overflow happens from outside the appliance.

View all articles in Water leaks from the washing machine: find the source