An inlet hose, a drain hose and an internal hose are not interchangeable. Replacement must match the circuit, its connections and the model’s sealing components.
What to look for in a damaged hose
With the appliance disconnected from power and the water turned off, an external inspection may reveal cracks, chafing, bulges, crushing or a displaced fitting. A hose that appears dry may also fail only during the operation that uses it.
If water is pooling under the machine and you can’t see where it’s coming from, follow the leak location steps before choosing an internal hose.
Preparing for a replacement
- Identify the circuit and the applicable part number, including seals and clamps.
- Check whether the manufacturer allows users to access that part. Reaching internal hoses may require technical disassembly.
- Disconnect the power and water, and carefully drain any contents that could spill when separating the connection.
- Reconnect the hoses without twisting or stretching them, and keep them clear of moving parts and edges.
- Once fully reassembled, check for leaks and confirm the machine functions correctly using the specified procedure.
Don’t treat the symptom with a patch
Glue, tape or undocumented joins can fail under pressure or movement. A clamp that is overtightened can also damage the material; its position and tightness must suit that connection.
In gravity-drain machines, changing the hose route to match that of an automatic machine may prevent drainage. The required height and length depend on the installation, not on the new part.
If a hose keeps chafing or becoming deformed, check its route and the strain it’s under before simply replacing it again.
View all articles in Washing machine component diagnosis and repair
