Dirty water returns to the washing machine after draining

If the washing machine drains and then water flows back in, investigate the return path. If it happens when a sink or another appliance is being used, that points to a shared drain.

Check when it comes back

Note whether the water returns immediately after pumping, while another drain is in use, or after several hours of inactivity. Also check whether the household drain gurgles, overflows, or drains slowly. Don’t run more water to trigger another overflow.

If it isn’t connected to other drains and the water level rises slowly, consider water entering while switched off. The dirty appearance may come from residue that was already inside, so it isn’t conclusive evidence.

Check the visible connection, not the plumbing blindly

Check the hose’s position and insertion against the model’s instructions. A poorly connected drain outlet and a blocked household pipe need different fixes. The installation must address sharing the drain and its venting in accordance with applicable local requirements.

Don’t add a universal backflow valve to hide the symptom: it may not be compatible with the flow rate and won’t clear a blockage in the building’s plumbing. Also, don’t seal connections that require air to enter.

If water is lost while it’s entering, the issue is filling and draining at the same time. Keeping the two situations separate helps prevent applying a fix for siphoning to a later backflow.

Don’t use the washing machine until the backflow is under control. If it depends on shared plumbing, arrange for the plumbing to be inspected as well as the appliance, where appropriate.

View all articles in Problems with filling, water level and draining