If the washing machine drains and then takes in water again, investigate the return path. If this happens when a sink or another appliance is used, it points to shared drainage.
Check when it returns
Note whether the water returns immediately after pumping, while another drain is in use, or after several hours of inactivity. Also check whether the household pipework gurgles, overflows or drains slowly. Do not run more water to provoke another overflow.
If there is no connection with other drains and the level rises slowly, consider water entering while switched off. The dirty appearance may be caused by residue that was already inside, so it is not conclusive evidence.
Check the visible connection, not the plumbing blindly
Compare how the hose is secured and inserted with the model’s instructions. A poorly connected outlet and a blocked household pipe need different fixes. The installation must address shared drainage and ventilation in accordance with the applicable local requirements.
Do not add a universal non-return valve to hide the symptom: it may not be compatible with the flow rate and will not clear a blockage in the building’s pipework. Do not seal connections that require an air inlet either.
If water is draining away while it is entering, the issue is filling and draining at the same time. Keeping the two episodes separate helps avoid applying a siphoning fix to a later backflow.
Do not use the washing machine until the backflow is under control. If it depends on shared pipework, arrange for the plumbing to be checked as well as the appliance, where appropriate.
View all articles in Filling, water-level and drainage problems
