A roar that gets louder as the machine speeds up may be related to support or drive components. The sound alone does not confirm that the bearings need replacing.
Tell a roar apart from knocks
Describe whether the noise is continuous and follows the speed, or consists of separate impacts. Also note whether it began gradually, appeared after the appliance was moved, or coincides with visible play.
You don’t need to run another high-speed spin cycle to prove that the sound gets louder. Use observations you have already made, and stop using the machine if the noise comes with rubbing, movement or an abnormal drum position.
What a hand spin can tell you
With the washing machine unplugged and opened using the normal procedure, a gentle check may reveal roughness if the design allows the drum to be turned by hand. Don’t force brakes or drive components that are designed to resist movement.
If the sound also occurs under this condition, it points towards mechanical parts, but you still need to distinguish between bearings, parts making contact and drive mechanisms. If there is play or misalignment, describe it as a second symptom.
What an inspection needs to confirm
Bosch lists bearings and other internal components among the possible causes in its washing machine noise troubleshooting guide. The technician needs to identify the worn part and check the condition of the shaft, seals and associated supports. The repair shouldn’t be chosen based on a comparison such as “it sounds like an aeroplane”, because different faults can sound similar.
Don’t apply lubricant from the outside to silence a sealed bearing. Temporarily reducing the noise would not prove that the support is still in good condition.
Ask for the component and associated damage to be identified before agreeing to a bearing replacement based on sound alone.
View all articles in Abnormal washing machine noises and vibrations
