How much laundry to put in the washing machine and how to distribute it

The permitted load depends on the programme and the items being washed, not just the advertised kilogram capacity. The laundry must fit and move as the manual specifies; being able to close the door does not prove the load is suitable.

Dry weight and volume answer different questions

When capacity is given in kilograms of dry laundry, compare it with that weight—don’t interpret the figure as a limit for laundry that is already soaking wet. Then check the programme’s maximum load: wool, quick wash or drying programmes may allow less than the reference cycle.

A light, bulky item can take up the available space before reaching the permitted weight. A compact, absorbent item can be difficult to distribute. For doonas and blankets, also check the requirements for the individual item.

Load according to the machine design

For a front loader, put the laundry in without packing it tightly against the door. For a top loader, follow the manufacturer’s instructions for distributing the load around the agitator or over the impeller. Don’t wrap a long item around a central component or press down to fit more in.

The rule about leaving a hand-sized gap doesn’t apply to every cycle and machine design. Use the load guidance in the manual.

Small loads and imbalance

A single item can bunch up during the spin cycle. Check whether the machine allows that load and what adjustment it recommends; don’t add items as ballast. If you need to redistribute the load, wait until the machine has stopped and the door is unlocked.

Compressed laundry, uneven cleaning and tangling are reasons to check the load size, but they don’t by themselves confirm a fault. Persistent banging and movement require a diagnosis if the load already meets the instructions.

Decide on the load before starting; redistributing it afterwards won’t make an oversized or excluded item acceptable.

View all articles in Prepare, sort and load the laundry