The washing machine heats the water too much

If the water seems to reach a temperature that is clearly not right for the programme, stop using the appliance and let it cool down. Do not open the filter or door to check how hot it is.

Confirm what operation it was carrying out

Check the programme and options selected. A high-temperature wash is different from a load set to cold. Heat from an integrated dryer is part of a separate circuit and does not mean the water is overheating.

If the issue started after installation, check the connection of the hot and cold water inlets. Do not loosen a hot or pressurised hose to check it.

What may need to be checked

The temperature sensor, the heater control or the water supply can produce unexpected results. A temperature-related symptom calls for checking the regulation, not automatically replacing the sensor.

Record the programme, load, messages, and whether there was steam or an unusual smell. Do not run another cycle to compare temperatures or adjust internal controls.

Retrieving the washing

Wait until the cooling and door-opening conditions specified in the manual are met. If water remains trapped, emergency draining should only be carried out when there is no risk of burns and using the authorised access point.

If you cannot tell the difference between expected heat and a significant fault, arrange an inspection before washing fabrics that could be damaged or before exposing yourself to a hot opening.

Cooling the appliance makes it safe to handle, but does not confirm that a regulation fault has been resolved.

View all articles in Electrical and heating faults in washing machines