If the water seems to reach a temperature that is clearly not part of the selected programme, stop using the machine and let it cool down. Do not open the filter or door to check how hot it is.
Confirm which operation the machine was performing
Check the selected programme and options. A high-temperature wash is not the same as a load set to cold wash. Heat from the integrated drying function belongs to a different circuit and does not indicate that the water is overheating.
If the issue began after installation, check the connection of the hot and cold water inlets. Do not disconnect a hot or pressurised hose to check it.
What may need to be checked
The reading from the temperature sensor, the control of the heater or the water supply can cause results that differ from what you expect. A temperature-related symptom requires the regulation to be checked; it does not automatically mean the sensor should be replaced.
Note down the programme, load, messages, and whether there was steam or an unusual smell. Do not run another cycle to compare temperatures or adjust internal controls.
Retrieving the laundry
Wait until the cooling and door-opening conditions specified in the manual are met. If water remains inside, emergency draining should only be carried out when there is no risk of scalding and using the authorised access point.
If you cannot tell whether the heat is expected or indicates a significant fault, arrange an inspection before washing fabrics that could be damaged or before attempting to open the machine while it is hot.
Allowing the machine to cool makes it safe to handle, but does not confirm that a regulation fault has cleared.
View all articles in Electrical and heating faults in washing machines
