A temperature sensor can only be assessed by comparing its response with the specification and the actual test temperature. A single reading is not enough to determine whether it is working or faulty.
Identify the function of the part
A resistance sensor, such as an NTC thermistor where used, provides information to the control system. A regulating thermostat switches according to its design. A safety cut-out interrupts a hazardous condition. Being located near a heat source does not make these parts interchangeable.
The documentation determines which parts are present, where they operate, and whether they relate to the wash water or the drying circuit.
What distinguishes a reading fault
In cases of no heating or excessive temperature, the technician compares the temperature measurement, wiring and connectors with the control system’s response. A broken wire can appear to indicate a faulty sensor.
Testing a sensor requires knowing the temperature and the manufacturer’s curve or table. A switching component must be tested under its own specified conditions. Do not apply the values or methods for one component to another.
When to check other components
A correct reading does not confirm that the heating element is receiving the correct command. If a thermal cut-out has tripped, investigate why that condition occurred before restoring operation.
Do not bypass cut-outs, adjust sealed thermostats or choose a sensor based on its shape or cable length. Any replacement must preserve the specified electrical characteristics, thermal contact, sealing and fitment.
Record the reference temperature and method used alongside the diagnosis; without that context, a resistance reading provides little information.
View all articles in Washing machine component diagnosis and repair
