If the water seems to reach a temperature clearly out of keeping with the programme, stop using the machine and let it cool down. Do not open the filter or door to check how hot it is.
Confirm what operation it was carrying out
Check the programme and options selected. A high-temperature wash is not the same as a load set to wash in cold water. Heat from an integrated drying function belongs to a separate circuit and does not show that the water is overheating.
If this started after installation, check the documentation for the connection of the hot and cold water inlets. Do not disconnect a hot or pressurised hose to check it.
What may need checking
A reading from the temperature sensor, the heater control or the water supply can produce results that differ from what is expected. A temperature-related symptom calls for the regulation to be checked; it does not mean the sensor should automatically be replaced.
Record the programme, load, messages and whether there was steam or an unusual smell. Do not run another cycle to compare temperatures or adjust internal controls.
Removing the washing
Wait until the cooling and door-opening conditions specified in the manual have been met. If water remains inside, emergency draining should only be carried out when there is no risk of scalding and using the authorised access point.
If you cannot tell the difference between expected heat and a significant fault, arrange an inspection before washing delicate fabrics again or risking exposure to a hot opening.
Allowing the machine to cool makes it safer to handle, but does not confirm that a regulation fault has cleared.
View all articles in Electrical and heating faults in washing machines
