Washing machine heating element: testing and replacement

The element that heats the water can fail because of an electrical break or loss of insulation. A continuity test only covers part of the diagnosis and does not prove that it is safe.

Confirm which part is not working

Start with the conditions for a wash that does not heat: programme, water supply and expected behaviour. The water level, sensor or electrical control may also be involved. Not all appliances have a water heater.

A technical diagnosis distinguishes between an open circuit, faulty insulation and no heating command. If an electrical safety switch trips, do not keep repeating cycles to link it to a particular stage.

Testing and replacement part

Testing requires model-specific information, suitable instruments and safe isolation. Continuity does not mean the insulation is sound between the element and the parts that must remain protected.

The replacement part must match in geometry, specifications, sealing and relevant mounting points. The temperature sensor may need to be checked separately, even if it is close to the heating element.

Installation and validation

The Electrolux procedure for its documented heating element includes draining beforehand and taking care with the seal. Rear access, as shown in that example, is not universal.

The position, mounting, connections and watertightness must be restored in accordance with the manual, followed by the specified electrical and functional checks. Tightening a seal further does not guarantee a better seal. The air heater in a washer-dryer is part of a different circuit and needs its own diagnosis.

A heating element repair must verify both that the water heats and that electrical safety and the seal of the tub being worked on are maintained.

View all articles in Washing machine component diagnosis and repair