If the water seems to reach a temperature clearly inconsistent with the cycle, stop using the machine and let it cool down. Don’t open the filter or door to check how hot it is.
Confirm which operation was running
Check the cycle and options selected. A high-temperature wash is not the same as a load set to cold. Heat from the integrated dryer is part of a separate circuit and does not indicate that the water is overheating.
If the issue started after installation, check the documentation for the connections to the hot and cold water inlets. Don’t disconnect a hot or pressurized hose to check it.
What may need to be checked
The reading from the temperature sensor, the heater control, or the water supply can produce results that differ from what’s expected. A temperature-related symptom calls for checking the regulation system, not automatically replacing the sensor.
Record the cycle, load, messages, and whether there was steam or an unusual odour. Don’t run another cycle to compare temperatures or adjust internal controls.
Retrieving the laundry
Wait until the cooling and door-opening conditions specified in the manual are met. If water remains in the machine, emergency draining should only be done when there is no risk of scalding and using the authorized access point.
If you can’t tell the difference between expected heat and a significant fault, arrange an inspection before washing fabrics that could be damaged or before exposing yourself to a hot door opening.
Letting the machine cool down makes it safer to handle, but does not confirm that a regulation fault has been resolved.
View all articles in Electrical and heating faults in washing machines
