Before diagnosing a lack of heat, check whether the washing machine heats the water internally or receives hot water from the supply. Touching the glass or clothes at the end of the cycle won’t tell you the temperature reached during the wash.
Identify the system and cycle
Check the manual to see whether there is an internal heater and how the temperature is regulated. For machines with two inlets, a missing hot-water supply or an incorrect connection needs the hot and cold water inlet diagnosis.
Check whether the cycle limits the temperature or uses a different phase from the one you expected. The selected temperature and cycle label should be interpreted according to the manual; the subsequent rinse may be cold.
Which signs provide the most information
- A thermal error code identified for that model.
- A repeated interruption during a documented heating phase.
- A persistent change compared with the same cycle under comparable conditions.
- A supply inlet fault when the machine’s design requires it.
Don’t open the machine during a wash or put a thermometer inside to take a reading. A long cycle alone doesn’t prove that the heating element is damaged.
Diagnosing the internal circuit
If the machine has a heater, the inspection should distinguish between the heating element, temperature sensor, water level and control sequence. Continuity in one component doesn’t confirm that the entire circuit is working.
Provide the exact cycle and the observed condition, without treating the temperature you felt at the end as a measurement of the wash.
View all articles in Electrical and heating faults in washing machines
