To interpret a Maytag alert, you need to distinguish front-load, top-load HE, and panel functions. The matches in this index come from North American support.
Two panel families
Front-load codes can include separate groups, such as F8 E1. Top-load HE units also display words or abbreviations like drn, lid, and Ofb. Copy all characters before choosing a guide: do not turn a lid message into a door message.
In the official front-load table, LOC/LC identifies locked controls; dET depends on the dispenser using a cartridge. These are different situations from a general start-up failure.
Water, suds, and load
If the machine takes too long to fill, see F8 E1, LF, and Lo FL. If the problem reaches the drain stage, F9 E1 and drn separate the troubleshooting by platform. Do not assume the pump needs to be replaced when water is left behind.
Suds have their own path in Sud and Sd. For laundry, distinguish Ofb, uneven distribution from OL, overload. In both cases, the selected cycle matters, as well as how much can physically fit in the drum.
Short alerts and limited checks
Int can accompany a pause or cancel action; rL/F34 requires removing laundry from the clean washer cycle on compatible front-load units. On top-load models, PF indicates that there was a power outage and lid requires checking the lid and cycle status. The manual determines how to continue: there is no valid reset for all of these situations.
If there is a leak, electrical smell, or a closure that does not work, stop using the machine. To request service, keep the model plate information and the time when the alert appeared.
Frequently Asked Questions
Where can I find my Maytag washer's full model number?
The full number appears on the model plate and is often listed in the appliance paperwork. Check the manual to see where the plate is located on your design; the series name does not replace that reference.
Does the same code mean the same thing on all of their washers?
Not necessarily. Maytag front-load and top-load HE models have different tables and controls; also confirm the market the appliance is intended for.
How do I tell a normal alert from a fault?
Check whether the text describes a selected function, such as Control Lock, or a condition that prevented the cycle from finishing. A drain wait after canceling does not follow the same path as a drain that repeatedly fails.
Does clearing the code confirm the problem is solved?
No. If the machine shows it again under the same conditions, the cause is still unresolved. A code that disappears after cutting power also does not mean you should continue if there is a leak or a faulty lock.
What information should I give the service technician?
Provide the model and serial number, the full code, and whether it is a front-load or top-load unit. Also note when it stops, what is left inside, and whether you changed the load, product, or connections right before the problem.
A code not listed here should be looked up in the exact manual, without automatically adopting another brand's interpretation.